STEP 1 – Stripping
Start by pulling out about 12 feet of bulk network cable to making the process a little easier. Carefully remove the outer jacket of the cable exposing about 1 1/4″ of the twisted pairs. Be careful when stripping the jacket as to not nick or cut the internal wiring. After removing the outer case you will notice 8 wires twisted in pairs and a rip cord (white thread).

STEP 2 – Inspecting
Inspect the newly revealed wires for any cuts or scrapes that expose the copper wire inside. If you have breached the protective sheath of any wire you will need to cut the entire segment of wires off and start over at step one. Exposed copper wire will lead to cross-talk, poor performance or no connectivity at all. It is important that the jacket for all network cables remains intact.

STEP 3 – Preparation
To prepare the wires and to make them easier to work with, you can untwist the pairs so they will lay flat between your fingers. The white piece of thread can be cut off even with the jacket and disposed.

STEP 4 – Layout
Now based on the wiring specifications you are following you will need arrange the wires in a certain pattern. There are two methods set by the TIA, 568A and 568B. 568B is the most common network cables, widely used for computer networks and digital phone systems. So for our demonstration we will use that. Starting from the left-top side of the RJ-45 plug, the wiring should be in the order shown at the right.

STEP 5 – Jack Preparation
Again, press all the wires flat between your thumb and forefinger as shown in step three. Verify the colors have remained in the correct order. Using a pair of scissors, cut the top of the wires even with one another so that they are 1/2″ long from the base of the jacket. Ensure that the cut leaves the wires even and clean; failure to do so may cause the wire not to make contact inside the jack.

STEP 6 – Wire Insertion
Ensuring that the wires remain flat and in order, push them into the RJ-45 plug with the flat surface of the plug on top. The white / orange wire should be on the left looking down at the jack. You can tell if all the wires made it into the jack and maintain their positions by looking head-on at the plug. You should be able to see a wire located in each hole, as seen at the bottom right. You may have to use a little effort to push the pairs firmly into the plug. The cabling jacket should also enter the rear of the jack about 3/16″ to help secure the cable once the plug is crimped.

STEP 7 – Crimping
Now place the wired plug into the crimping tool. Give the handle a firm squeeze, you should hear a ratcheting noise as you continue. Once you have completed the crimp, the handle will reset to the open position.

STEP 8 – Testing
Once your new cable is completed, it is not a bad idea to test the cable to ensure that it will function in the field. It is vital that all eight wires have connectivity and are in the correct order. Mis-wired network cables could lead to headaches down the road. In addition, with power-over-ethernet making its way into the market place, crossed wire pairs could lead to physical damage of computers or phone system equipment; making it even more crucial that the pairs are in the correct order. A simple cable tester can quickly verify that information for you.

You can buy all the supplies you need in bulk at a place like home depot. Don’t forget to use a Home Depot Promotion Code to get a discount when you order online.

I purchased this phone through Amazon and am very happy with it. I would recommend this phone to anyone who needs something affordable.

5jährige Solistin des Rundfunk-Vorschulchores Leipzig; Instrumentalgruppe unter Leitung von Hans Sandig; Komposition und Text: Kurt Schwaen

Check out websites: www.gearflag.com www.gearflag.com/au (Australia)

Product Link: www.focalprice.com 12V-24V Wireless Car MP3 Player with FM Transmitter (Black) SKU: EF377B Price:US$ 5.51 Highlights Car mp3 player with FM transmitter. Comes with remote controller. LCD Screen display. 206 preset channels within 87.5-108MHz. General Specs Input Voltage 12V-24V Screen LCD FM Modulator support SD Card Slot support USB Port support Features Car MP3 player with FM transmitter. 206 Preset FM channels within 87.5-108MHz. Support MP3/WMA music playing. Support USB host, SD/MMC card and Line-in function. Come with memory functions of song, volume and frequency. LCD display of frequency/track NO. and name of song. Car cigar socket power supply (12V or 24V DC power). Comes with multi-funcational ultrathin remote control. Package Details weight: 74.90 g size: 20*14*3 cm

Oh, wow! Are these things fun! Sharing the same ergonomic design and OEL display as the Kaossilator 2, the streamlined Mini Kaoss Pad 2 is both a pocket-size effect processor and a portable MP3 player. The Kaoss XY touchpad provides amazing control using a single finger. Inside are 100 diverse, ready-to-play effect programs — from classic to cutting edge. BPM and tempo-based effects can be set by hand, or by using tap-tempo or auto BPM detection. The Kaoss Pad 2 provides an MP3 player that can play audio data from a microSD card. You can save your favorite songs on a card, and apply real time effects to the song as it plays. Hold and FX Release features deliver a more complete, musical performance. You have just got to get your hands on one! www.korg.com Be sure to check out the Kaossilator 2 at www.korg.com ©2012 KORG Inc. All rights reserved. All demo loops are created by MSK For more information about MSK, visit : soundcloud.com

Product Link: www.focalprice.com 2GB Mini Digital MP3 Player (Black) SKU: EM038B Price:US$ 11.83

Terrific Item for you. Handle this mp3 player. Details about yepp-P3 and follow this review!!

Top 8 MP3 Player Ultra Compact – HOT : less than MP3 Player Ultra Compact Top 8 MP3 Player Ultra Compact 2011 1. Sandisk Sansa Clip 2gb www.amazon.com 2. Samsung u5 www.amazon.com 3. Sandisk Sansa clip 1gb www.amazon.com 4. Apple Ipod Shuffle 3rd Generation www.amazon.com 5. Sandisk Sansa m250 2gb www.amazon.com 6. Centon Craze4gb www.amazon.com 7. Sandisk Sansa Express 1 gb www.amazon.com 8. Sony NW-E003 1gb www.amazon.com

Remix of Dreams of an Absolution

Introduction POTION is a motion-controlled game system that allows two players to battle head-to-head or one player to compete against AI for ultimate ping pong glory. For the two-player setup, two video feeds from consumer digital cameras are each separately fed into a pair of slave DE2 boards. These inputs are primarily used to detect objects held in players’ hands to represent paddles. See: people.ece.cornell.edu and people.ece.cornell.edu

MP3-Player K5 wird überfahren und tut danach immer noch.

For people in the market for an inexpensive MP3 player that’s expandable, SanDisk has updated its two year-old Fuze player with a larger screen, capacitive touch navigation and more @ butterscotch.com: bit.ly